Are you struggling with the Netgear router blinking amber LED issue? Seeing amber LED on Netgear router continuously? Due to this error, you also encountered routerlogin.net refused to connect issue. If your answer to these queries is yes, then you need to fix the “blinking amber LED on Netgear router” issue as soon as possible. Don’t worry! We have got you covered. In this post, we have provided various fixes through which fixing the issue you are currently getting will be as easy as counting 123 for you. Let’s get started!
Why Am I Getting the Blinking Amber LED Issue?
Before we provide you the troubleshooting tips to fix the issue, let’s first help you find the reasons causing the “blinking amber LED on Netgear router” issue. Knowing the reason behind the issue will make it easier for you to rectify it, isn’t it?
- Your internet connection is a week
- You haven’t used for Netgear router for a longer time and due to inactivity you got encountered an issue
- Your Netgear router is not connected to the modem in the correct manner
- You have used a damaged Ethernet cable for connecting your modem and the Netgear router
- Your Netgear WiFi router is not configured in a proper way
- Issues from your internet service provider also lead you to the issue
- You haven’t updated the Netgear router’s firmware
- Your Netgear router is placed in a bad location
How to Fix Blinking Amber Issue?
Given below are the instructions that will surely help you fix the “amber light on Netgear router” issue. Keep reading!
Fix 1: Reboot Your Netgear Router
Rebooting is one of the effective ways to fix the “blinking amber LED on Netgear router” issue. Here’s how to power cycle or reboot the router:
- Turn off our Netgear router and unplug it
- After some time, turn the Netgear router back on
- Wait for the router’s LED to get stable
- Connect it to your modem using an Ethernet cable
Now, see if the “LED on Netgear router” issue is fixed. If you nod yes, www.routerlogin.net setup page and configure your device with ease. Bear in mind, improper configuration of the device is one of the major causes behind getting the “blinking amber LED on Netgear router” issue. So, please configure the router in a proper way in order to make the most out of it.
Fix 2: Relocate Netgear Router
The bad location of the Netgear router also lets you experience a “blinking amber LED on Netgear router” issue. To get it fixed, we suggest you change the location of your Netgear router right away. The best location for your Netgear router is the center-most area in your home, near the modem.
Fix 3: Check the Cable Connection
The “Blinking amber LED on Netgear router” issue also persists if the cable connection made between your Netgear router and the modem is improper. To get it fixed, ensure to connect your router and the internet modem in a proper way using a well-maintained and non-damaged Ethernet cable. Also, ensure that you have connected them securely in a proper way. By any chance, if you don’t have a cable, then connect them wirelessly. Consider this as one of the most important fixes to troubleshoot the “blinking amber LED on Netgear router” issue.
Fix 4: Contact Your ISP
Slow internet also causes a “blinking amber LED on Netgear router” issue. So, get the issue fixed by contacting your internet service provider. You just have to ensure from him that you are getting sufficient internet speed from his side and that your existing data pack is up-to-date.
Fix 5: Update Your Router Firmware
Outdated firmware on your Netgear router also makes your device blink an amber color. So, to fix the “blinking amber LED on Netgear router” issue and to make the most out of your device, update its firmware right away. Just visit the firmware update page of your Netgear router using Netgear router IP login and follow the instructions to perform a firmware update as per the router’s model you have.
Did nothing work for you so far? Well, in that case, we suggest you reset your Netgear router. Resetting is the only option left that can save you from getting the “blinking amber LED on Netgear router” issue again and again. Thus, to reset your Netgear router, press the reset hole present on it using a pin, hold the hole for some time, and release it. Thereafter, reconfigure the Netgear router from the scratch.
Endnote
Once your router gets reconfigured, the “blinking amber LED on Netgear router” issue will surely go away, isn’t it Now, you are all set to enjoy your router’s WiFi range from any corner of your house.
Similar Post- Why am I Getting Netgear Router Keeps Disconnecting Issue?